SELEKTA GS X3000

The strong band saw sharp edge for high-elastic materials

Product level 3

Hook tooth

Profiles + Solid materials

Band width 27 x 0.9 – 100 x 1.6mm

Inquiry Now

Description

The strong band saw sharp edge for high-elastic materials

Application:

  • Outstanding cutting rate with high-alloy austenitic materials
  • Electroslag remelted material, material as of 1000 N/mm² tensile strength
  • Continuous operation in large sawmills

Advantages:

  • High efficiency by excellent cutting performance
  • Fewer blade changes due to increased blade-life
  • Lower cutting forces and smoother running

Features:

  • Ground contour with specially matched tooth pitch
  • Tooth edge made of the cutting material X3000® with positive rake angle
  • Special set for optimal chip division

Size

Dimensions Tooth pitch in ZpZ
Width x thickness variable
mm Inch 2.5-3.4 1.8-2.5 1.4-1.8 1.2-1.6 1-1.4 0.7-1
27 x 0.90 1-1/16 x 0.035 K
34 x 1.10 1-3/8 x 0.042 K K
41 x 1.30 1-5/8 x 0.050 K K K
54 x 1.30 2-1/8 x 0.050 K
54 x 1.60 2-1/8 x 0.063 K K K K K
67 x 1.60 2-5/8 x 0.063 K K K K K
80 x 1.60 3-1/8 x 0.063 K K K K
100 x 1.60 4 x 0.063 K
Contact length [mm]
[Inch]		 100-220
3.9-8.7		 180-350
7.1-13.8		 300-600
11.8-23.6		 400-700
15.7-27.6		 500-1000
19.7-39.4		 900-2000
35.4-78.7

K = Hook tooth

Technical Data

  • Nickel-based alloys
  • Titanium / titanium alloys
  • Tempered steels (over 1000 N/mm² / 32 HRC)
  • Rust-proof and acid-resistant steels (austenitic)
  • Duplex and heat-resistant steels
  • Aluminium bronzes