PROFIDUR
The coated professional for profiles
Product level 3
Trapezoid tooth
Profiles
Band width 54 x 1.3 – 67 x 1.6mm
Description
The coated professional for profiles
For High Performance sawing of Beams and Profiles and for Burr Sawing this is the best product. For excellent surface Quality Contact Wikus Dealer in India, Gujarat, Ahmedabad.
Applications
- Girders and profiles
- Perfectly for industrial steel construction
Advantages
- Capacity increase by maximum cutting performance and blade-life
- Low-burr and precise cuts
- Considerable reduction of noise emission
Features
- Patented tooth geometry for interrupted cutting channel
- Sturdy carbide-tipped tooth edges coated with hard material
Technical Data
| Dimensions | Tooth pitch in ZpZ | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width x thickness | variable | |||||||||||
| mm | Inch | 3-4 | 2-3 | |||||||||
| 54 x 1.30 | 2-1/8 x 0.050 | T | ||||||||||
| 54 x 1.60 | 2-1/8 x 0.063 | T | T | |||||||||
| 67 x 1.60 | 2-5/8 x 0.063 | T | ||||||||||
| Contact length | [mm] [Inch] |
90-150 3.5-5.9 |
150-270 5.9-10.6 |
|||||||||
T = Trapezoid tooth
Materials Overview
- Case-hardened steels, spring steels and ball-bearing steels
- Nitrided steel, high-speed steel and tool steel
- Construction, deep-drawn and machining steels
- Carbon steels, and quenched and tempered steels
- Cast iron
Description
The elite exhibition smash hit band saw sharp edge covered with hard material
Applications
- Structural, case-hardened, tempering and tool steels
- Serial sections
Advantages
- For extension of machine capacity in case of bottlenecks
- Reliable even in shift work without manpower
- Reduction of noise emission
Features
- Special hard material coating for steel cutting
- Extra back edge coating for lower friction
Technical Data
| Dimensions | Tooth pitch in ZpZ | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width x thickness | variable | |||||||||||
| mm | Inch | 3-4 | 2-3 | 1.7-2 | 1.4-2 | 1.2-1.6 | 1-1.4 | 0.85-1.15 | ||||
| 34 x 1.10 | 1-3/8 x 0.042 | T | T | |||||||||
| 41 x 1.30 | 1-5/8 x 0.050 | T | T | T | T | |||||||
| 54 x 1.30 | 2-1/8 x 0.050 | T | T | |||||||||
| 54 x 1.60 | 2-1/8 x 0.063 | T | T | T | T | T | ||||||
| 67 x 1.60 | 2-5/8 x 0.063 | T | T | T | T | T | T | |||||
| 80 x 1.60 | 3-1/8 x 0.063 | T | T | T | ||||||||
| Contact length | [mm] [Inch] |
80-170 3.1-6.7 |
150-300 5.9-11.8 |
250-370 0.8-1.9 |
290-550 1.2-2.4 |
400-750 2-4 |
500-1000 19.7-39.4 |
700-1400 27.6-55.1 |
||||
K = Hook tooth
Materials Overview
- Case-hardened steels, spring steels and ball-bearing steels
- Nitrided steel, high-speed steel and tool steel
- Construction, deep-drawn and machining steels
- Carbon steels, and quenched and tempered steels
- Cast iron